When you drive on the road, you understand how useful light bars are. Increased illumination and customizable colors light bars are helpful in saving energy as well. Other than that, if you’re often in a situation where you just need more light, then a light bar is what you need.

Given the benefits it has, many people find themselves confused when it comes to light bar wiring. Once you have read this article, the confusion will be gone. Let’s find out how to wire a light bar to a toggle switch? But, why with the toggle switch, you will know when you will read the details of it.

Toggle switch

One of the simplest and yet widely used, the toggle switch is a type of electrical switch that works by using a manual lever that is moved up and down to turn the lighting on or off. Among the easiest type of switches in terms of use, the toggle switch can be used with almost any electrical application, be it domestic, industrial, or commercial. A light switch on the wall is a common example when it comes to home applications.

Despite its availability in different sizes and designs, the working principle of a toggle switch is quite simple and the same for all. When the toggle is moved, it completes the electrical circuit and permits the current to run through. In the same manner, it deactivates when you move the toggle again on the other side.

Small, relatively good, and easy to use, let’s get to know how to wire a light bar to a toggle switch.

Wiring a light bar to a toggle switch

Involving an electrician for the task that you can do yourself is not feasible. Saving you a few bucks, you will never have to wait for the electrician to arrive in case of an emergency. The proper instructions and dedication are the only things that are required to complete the task perfectly.

Having the appropriate tools and materials is crucial for completing your work flawlessly. It mainly includes a toggle switch, wires, drill, and an inline fuse. Only after you have these things in your processions proceed to the next steps.

When dealing with electrical projects, safety concerns should not be ignored at all costs. Make sure the power supply is disconnected wherever you are working.

It is assumed that you have the right spot in your mind where you are going to install the light bar with a toggle switch. Once you are over these things, you are ready to perform your task.

Examine the toggle switch you have purchased. Typically, you will see three pins where the negative one is to be grounded. Based on the location you are installing, run the wires accordingly and connect them through with the lighting unit. The two positive wires will be connected with the light bar and the battery if that is required. To install the light bar, route the wires to the light bar’s position and join them according to their colors.

Keeping in mind the sturdiness of the light bar and the location you are setting it up, do not drill the holes unnecessarily, or else it will disturb the wiring. Nuts and screws should be used as a replacement for self-tapping fixes when mounting the toggle switch. Wires, bolts, and brackets are usually included with light bar toggle switch wiring kits that are readily available in hardware stores.

Once everything is in place, adjust the angle if required, and then secure the bolts correctly.

The hardest part is over. It’s now time to check results and whether you have performed everything well or not. Turn it on, and if it works, tap yourself on the back as you have made it to the end without any problems.

Conclusion

Light bar toggle switch wiring may seem a difficult process, but with the right tools, elements, and instructions, you can complete the task without any issues. From identifying the terminals to soldering the wires between the light bar and the corresponding terminals on the toggle switch, all can be done easily in no time. Electrical knowledge can be helpful but not necessarily required for this task. So, when are you going to perform your first project of wiring a light bar to a toggle switch?