No matter the type of pump you have installed, if you are unable to get desired water pressure, there is no benefit in having a well pump. But, before you go for the replacement, hear us out as we bring you the ultimate solution. Get to know how to increase water pressure on a well pump and enjoy having constant water pressure at your home.

How to boost water pressure at a well pump

Water pressure is among the top factors you take care of when installing a well pump. You need to have adequate water pressure even if you are washing dishes or doing laundry.

In case you are living in highly populated areas, the water pressure might be controlled by local municipal authorities. However, if you rely on a well water supply, the pressure is usually determined by a pump switch.

The adjustment of the pump pressure switch can help you fix the pressure problem in no time; however, there are other parameters as well. Before we move ahead, remember the feasible water pressure for a well is 50-60psi; lower than that, you must get it checked.

Pressure switch

First thing first, you need to check the pressure setting on the pump pressure switch. There are multiple setting options that you can select from, such as 20/40psi or 40/60psi, where the lower number depicts when the pump is turned on, and the higher number represents the pressure that turns off the pump.

Here’s the right way to go about it.

Locate the pressure switch
Turn off the power supply
Attach a metering device to take a reading of water pressure
Set the pressure by turning the nut clockwise
Adjust the setting as per your requirement. You can see the reading on the gauge.

Install constant pressure system

A mechanical device that helps you maintain constant pressure, it can be installed along with your spring pump. Not only the constant pressure valve helps prevent fluctuation, but also it helps in prolonging the life of the well pump. It does so by decreasing the number of cycles and bypassing the pressure tank during rush hours.

Installing pressure valves is simple and does not require being linked to the power source.

Booster pump

If none of the above solutions seems a good fit to you, then you can go for installing a water pressure booster pump. As the name implies, it gives a necessary boost required to attain constant pressure. The booster pump works with motors and impellers to increase the water pressure of your house.

Pump with a higher flow capacity

Often it happens that we choose the pump that does not have the capability to supply constant pressure at all times. Selecting a water well pump is a step that requires careful consideration. If you are facing a low water pressure issue and have already adjusted the setting to the highest, you need to change the pump.

There are a variety of well pumps with different flow capacities, ranges, and flow rates. Choose a well pump by keeping these factors in mind.

What causes low water pressure?

At times it happens that you get a good water pressure at the start, but after a few days’ time, the pressure keeps decreasing. You must be aware of the possible causes behind water pressure problems in order to prevent this from happening.

The primary reason we face this issue is because of the blockage within the plumbing system. Sediments, minerals, and other particles create a clog within the system that reduces water pressure.
Most often, we have narrow pipes fitted in our homes, and we blame the well pump for low water pressure.
Clogged faucets are another common issue, and we continue to check on water pumps instead of focusing on the root cause.
At last, there can be problems with any of the components of the pressure tank or the well pump. Inspect the whole system, and you may find where the issue is.

Check the pressure tank, pipes, faucets, and all other additional appliances because most of the time, the problem of low water pressure will be solved at this stage. If all seems to be good, then you can apply any of the above techniques to increase water pressure on the well pump.

Conclusion

Well water systems can be challenging, but that doesn’t mean you have to deal with low water pressure in your home, especially when you have different ways to increase water pressure on the well pump. All you need is to inspect what is causing the problem and adjust the setting on the pressure switch. Most likely, the problem will be solved.

Let us know if you have ever faced the same issue and how you fix it.