Regardless of whether you have an indoor or outdoor pool, there is always a problem with the pool water turning brown every other day or two. When swimming is supposed to be relaxing and full of fun, seeing the pool filled with brown water feels disturbing. Draining out all and filling it with fresh water is not a viable option as an average size pool takes hundreds of gallons of water to fill. Still and all, swimming in brown water isn’t an option either.
The only choice we have left is to get brown pool water clear, but how do you do that? Well, it seems a good option, and if you want to know how to get brown pool water clear, this article proves to be a valuable pack for you. So, let’s stick to it, read out how we can get rid of brown pool water the right way, and enjoy the swimming as it should be.
Later in this article, we will also see what causes the pool water to turn brown and what can be done to avoid it. But first, let’s begin with how you can get rid of brown pool water.
How to fix brown pool water?
Not only does it look ugly, but oftentimes it spreads a bad smell. Swimming pools are not meant to be left with brown water but should be crystal clear so that you can enjoy swimming anytime you want.
Without any more delay, let’s deep dive into it and see how to treat brown pool water. There are multiple ways you can apply which seem feasible to you. At times, you may have to work on more than one technique at a time.
Get rid of the large debris
The pool is for the water, and only water should remain in it. Get rid of any visible elements or debris that can be removed. The skimmer basket should also be clear from all remains. The half work will be done if you are able to remove all solid objects from the pool.
After that, starts the actual process.
Use ascorbic acid
The most efficient way to clear out the brown pool water. The acid can be bought from the local store as it’s readily available. Treating the brown pool water with this acid will help make the water clean as it was before. One pound of acid would be enough for an average size pool.
Turn off the pump
After you have applied the acid, you’ll have to wait for one to two hours. Meanwhile, you will see the stains getting off the surface. Switch off the pool pump for the time being.
Use a bottle of revive
Iron is the element found in water in excess amounts, and it is what turns the water brown. To get rid of iron particles, a bottle of revive is used. Once you apply this solution, you will have to wait for at least 24 hours as it accumulates the particles and converts them into sediment. The sediments will then sit back on the ground.
Clean up the pool
Once the sediments sit on the ground, you can clear them out easily. Vacuum from the ground, and the pool will be clear of all debris. That’s all it takes to make brown pool water clear.
At the time you do the process, make sure the filters are working properly and are in good condition. Rest assured, the water will be crystal clear once you have applied the above process.
Why is my pool water brown?
You know the ways to clear brown pool water, but do you know what causes the water to turn brown? If you learn this, you may take measures to prevent pool water from turning brown in the first place.
So, the pool water turns brown mainly because of impurities. The impurities can be of different forms, such as the presence of organic materials, oil, dirt, and debris on the water surface. In the same manner, if the water contains an excess amount of minerals, especially iron, the water will turn brown.
Chlorination and direct sunlight have an effect, too, as they can react with minerals present in pool water. Moreover, as the pools normally have a large surface area and are open, it’s easier for dirt and debris to get in and accumulate underwater. As a result, it contaminates water and causes discoloration. Dust storms are another common reason for pool water to get brown.
Likewise, if swimmers have applied lotion or any other skin products, it may also cause discoloration. However, it’s not true for all products.
Improper water filtration is another obvious reason that causes the pool water to turn brown.
It is important to realize that there can be more than one cause for this problem and multiple methods can be applied when it comes to clearing it out.
Conclusion
Pool water needs to be clear of all dirt and debris; it’s necessary. If not cleaned timely, it will look like a garbage house and will give birth to viruses, insects, and bacteria.
Anyways, the brown pool water can be caused by several reasons. It can be a dust storm or merely iron particles present in the water. The key is to know how to clear it out the right way. Using ascorbic acid and the bottle of revive would do the task. However, if still it doesn’t get clear, flush all the water, do the cleansing, and fill the pool with fresh water.
Once you have done that, make sure you take care of the maintenance and do the cleansing on a regular basis. The pool water gets dirty only when you leave it unmanaged for a long time.